I took a look at the instructions for the Stealth Hitches Hidden Rack Receiver item # SH49GR, that fits your 2020 Range Rover. It does not require any trimming to install. I have attached the instructions below along with a screenshot where they explain what in this case doesn't need to be trimmed.
The Stealth Hitches Hidden Rack Receiver item # SH49GR is only for using accessories like a bike rack or cargo carrier. If you plan on towing you will want the Stealth Hitches Hidden Trailer... view full answer...
Thank you for your question about the Curt Hitch Receiver # 13456 for your Land Rover LR3! Weight distribution systems (WDS) can be a bit confusing since they re-adjust how tongue weight is calculated so I'd be happy to help shine some light on this for you!
Pretty much every WDS weighs North of 100 lbs but the weird thing is that this actually won't be taken into account when it comes to tongue weight. I don't know the actual science behind the reason why but the best way that I've been... view full answer...
The Curt # 13942 has the following bolt hole to bolt hole measurements.
The bolt hole closest to engine and middle hole- 34-3/4" apart center on center.
The bolt hole closest to the rear of the truck- 34-1/8" apart center on center.
I've also linked an image with these dimensions. view full answer...
Though we have yet to get the chance to install the Curt # C13243 on a 2020 Land Rover Range Rover Sport, we have done an install with the Draw-Tite # 75229 on a 2016.
When this was done, we got 13 inches from the ground to the inside top of the receiver, which should be very similar, if not the same, as installing the # C13243 on your 2020.
Determining the correct rise will then depend on how high the bottom of the trailer coupler is from the ground. You technically have plus or minus... view full answer...
If the distance from the top of the hitch opening on your Land Rover to the bottom of the rear door edge is more than 8 inches the Pro Series cargo carrier part # 63153 that you referenced would still be able to open with it installed as this has a height of 8 inches from top of shank to top of carrier rails. view full answer...
I would be happy to list out the Thule roof rack, with Evo crossbars, you will need to use a Thule Hullavator item # TH898 on 2023 Land Rover Defender but I have no idea what crossbars or rails you currently have. It doesn't look like you ordered them from us so I can't accurately answer whether or not they'll work on your Land Rover. This roof rack requires your Land Rover to have tracks preinstalled on the roof from the dealer. We don't have an option for a bare roof.
Thule WingBar... view full answer...
From where the Thule Aeroblade Edge Roof Rack part numbers # TH7602B-TH7603B and # THKIT3112 will install on your vehicle they will add right at an additional 2-1/2 inches of height to the vehicle.
I attached a picture that shows this dimension. view full answer...
I did some research on the 2015 Jeep Cherokee Latitude And Trailhawk with the same engine. From what I was able to find the Latitude is 5 ft 5.7 inches from the top of the roof to the ground and the Trailhawk is 5 ft 7.8 inches. This is assuming the same size tires, wheels, and suspension are being used on the vehicle. A difference in any of those components would certainly make a difference in the bumper height.
The Curt Trailer Hitch, part # C13172 is a fit for both models. This is... view full answer...
Yes, I do. The Inno roof rack you were looking at would be just over 3" taller than the top of your 2019 Land Rover Discovery's roof rails. It includes the following parts:
Inno Aero Crossbars - Aluminum - Black - 51" Long and 54" Long - Qty 2 item # INXB130-138
Inno Through Feet for Aero Crossbars - Flush Side Rails - Qty 4 item # INXS450
Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet item # IN68FR view full answer...
The Curt # C13396 is designed for a 2015 - 2019 Land Rover Discovery Sport. The hitch mounting flanges taper inboard from rear to front at roughly a 7° angle. The mounting holes closest to the receiver tube at the back of the vehicle are 44.780 inches apart on center, the center set of holes is 44.173 inches apart center to center and the holes closest to the front of the vehicle are 43.72 inches apart center to center as shown in the provided photo. view full answer...
Installing the Thule AeroBlade Edge Roof Rack, # TH7602-TH7603, and Thule Fit Kit for Podium Style Foot Pack, # THKIT3112, will increase the height of your 2013 Land Rover LR4 approximately 3 inches.
As you stated, the Thule Motion XT Alpine Rooftop Cargo Box, # TH629506, measures 12-1/4 inches at it's tallest point from the top of the crossbars. This cargo box combined with the roof rack system will add approximately 15-1/4 inches to the height of your LR4. view full answer...
The longest available Taylor Made Replacement Support Bar for Boat Windshields is 14 inches # 3691638, but this still might work for you since the length stated only takes into account the bar portion and not the fittings. With the fittings, from end-to-end it will add approximately another 2-1/2 inches to the total length. For this reason you may actually need either the 12" Long: Taylor Made Replacement Support Bar for Boat Windshields # 3691634 or 13" Long: Taylor Made Replacement Support... view full answer...
The SmartPlug RV Power Cord # SM59FR weighs 9-lbs. This cord is rated for 125v or 30Amps, and is 30' long.
I have attached a review video for you too check out as well. view full answer...
If you can lighten the trailer's loaded and ready to tow tongue weight to the point where it's below 330 lbs, it would be okay to use the OEM hitch offered by Land Rover. You could possibly move some items to the rear of the travel trailer to lighten the tongue weight.
This being said, you might want to check what the actual tongue weight capacity of the vehicle itself is. This is typically something I could look up for you, but I cannot find an accessible .pdf copy online. If the tongue... view full answer...
When we do an install video, we will typically get the measurement you are looking for. Unfortunately, we have not yet had the opportunity to install a hitch on a 2011 Land Rover LR2.
With high hopes I called Curt hoping that they would be able to provide that dimension, but they do not measure that dimension during their test fits.
This being said, Curt was able to provide me with some dimensions that we can use to approximate the distance. All is not lost if you are willing to crawl... view full answer...
The Trailer Coupler Lock # e98888 is made from stainless steel.
I attached a review video link for this for you to check out as well. view full answer...
The PPI-AC7 Replacement Battery Pack for Air Beds Rechargeable Battery Pump # 341025 takes your 110v/120v household electrical feed and turns it into DC current to charge the 12v DC battery. I've linked a photo of the specs on the plug for a reference and it is not recommended that a charger from another product be used as it may damage the battery. view full answer...
I called my contact at Thule and he said that the measurement from the top mounting point of your factory rails to the bottom of the Thule WingBar Evo Crossbars # TH711420 is about 3-1/2 inches. This measurement includes the Rapid Podium Feet for Thule Crossbars # TH460R and the Fit Kit for Thule Podium-Style Roof Rack Feet # THKIT3112. view full answer...
The tongue weight listed for Curt trailer hitch # C13128 (600 pounds) is for the hitch and does not necessarily correspond to the 2013 Land Rover Evoque.
To be certain of the tongue weight capacity of the Land Rover, check the vehicle owners manual. There should be a towing section that has the capacities listed.
From what I could find on line the gross trailer weight capacity is 1650 pounds. This likely means the tongue weight capacity is 150 to 165 pounds. Check your owners manual... view full answer...
Yes, we do. Since your 2020 Land Rover Evoque does not have the side rails, you will want the roof rack by Thule and it includes the following parts:
Thule WingBar Evo Crossbars - Aluminum - Black - 53" Long - Qty 2 item # TH711420
Evo Clamp Feet for Thule Crossbars - Naked Roofs - Qty 4 item # TH710501
Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet - 5222 item # TH145222 view full answer...